Ceramic Inserts for Hard Steel
Description: Special Ceramic inserts machining Hard Steel materials
Processing Materials: Hard Steel, Bearing Steel, etc.
Processing Types: Semi-Finishing, Finishing
Whatsapp: +8613271562251
Email: halnn@halnn-group.com
Inserts Grade
| Grade | Main Ingredient | Application |
| H100，H200 | Al₂O₃ | Use to high speed semi-finishing and finishing hardened steel, bearing steel and other material |
| H100C/H200C | coated ceramic inserts | Use to high speed semi-finishing and finishing hardened steel, bearing steel and other material |
| HQ100 | Al₂O₃ and TiC | Compared with the H series, it improves wear resistance and is used for precision or semi -precision processing for high -hardness steel and ball cast iron. |
Advantage
(1)Excellent wear resistance extends the work life of cutting tools;
(2)High cutting accuracy and high surface finish
(3)Various standard and non-standard inserts are available
Matching Holder
1.Case of H100 Turning Bearing steel
 | Material: bearing steel |
| Grade: H100 | |
| Cutting parameters: Vc=150m/min, Fr=0.1mm/rev, ap=0.2mm | |
| Cutting status: dry cutting |
| Grade | Half depth of cut wear on tool flank | Groove wear on tool flank | Tool wear morphology |
| Halnn H100 | 75μm | 95μm |  |
| Other Brands | 70μm | 110μm |  |
2.Comparison of flank wear of HQ100 turning bearing steel
Workpiece material: Bearing steel
Processing parameters：
VC: 150m/min
Fr: 0.1mm/r
Ap: 0.2mm
Cutting state: Dry turning
Mode:CBN tools, PCD tools Type:PCBN insert, pcd tools Application:auto parts
Mode:CBN tools Type:cylinder liner Application:auto parts
Mode:RNMN RCMX-V RCMX-Y PCD Type:BN-K1,BN-S20,CDW010 Application:Rollers
Mode:Solid CBN Insert Type:BN-K1,BN-S20 Application:Wear Parts
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.
