Ceramic Inserts for Cast Iron
Description: Special Ceramic inserts machining cast iron materials
Processing Materials: Gray cast iron, ductile iron, alloy cast iron, etc.
Processing Types: Roughing, Semi-Finishing, Finishing
Whatsapp: +8613271562251
Email: halnn@halnn-group.com
Inserts Grade
| Grade | Main Ingredient | Application |
| KD100，KD200，KD300 | Al₂O₃ | Use to semi-finishing and finishing casting iron material |
| KN100，KN200 | Si3N4 | Use to Roughing Casting iron, Steel and other non-ferrous metal |
Advanage
1.Good wear resistance and high temperature resistance for stable machining;
2.Strong toughness, the improvement of cutting speed makes ceramic tools faster than carbide inserts for improving work efficiency;
3.Various standard and non-standard inserts are available
Matching Holder
Universal turning tool holder |
High-efficiency and high-precision turning tool holder |
1.Case of KN100 Turning Grey cast iron material
 | Material: Grey cast iron |
| Grade: KN100 | |
| Cutting parameters: Vc=500m/min, Fr=0.1mm/rev, ap=0.5mm | |
| Cutting status: dry cutting |
| Grade | Half depth of cut wear on tool flank | Groove wear on tool flank | Tool wear morphology |
| Halnn KN100 | 140μm | 175μm |  |
| Other Brands | 185μm | 240μm |  |
2.Case of KN100 Turning Cast iron material
 | Material: Grey cast iron |
| Grade: KD100 | |
| Cutting parameters: Vc=300m/min, Fr=0.1mm/rev, ap=0.5mm | |
| Cutting status: dry cutting |
| Grade | Half depth of cut wear on tool flank | Groove wear on tool flank | Tool wear morphology |
| Halnn KD100 | 170μm | 190μm |  |
| Other Brands | 180μm | 195μm |  |
Mode:RNMN RCMX-V RCMX-Y PCD Type:BN-K1,BN-S20,CDW010 Application:Rollers
Mode:Milling,Drilling,Reaming Type:PCD tools,Carbide coated tools Application:Aerospace field
Mode:CBN tools Type:cylinder liner Application:auto parts
Mode:CBN Inserts Type:BN-S300,BN-S30 Application:Brake Disc/Drum
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.
