Applied materials: steel, cast iron, brass, hardened steel with HRC60, etc
Processing parts: outer circle, end face, inner hole, taper, arc, etc.
Rolling angle: left and right 90 degrees, adjustable
Holder shank: 16、20、25、32
Workpiece roughness: Ra is less than 0.13
Whatsapp:+8613271562251
E-mail: halnn@halnn-group.com
Product introduction
Rolling is an economical, simple and reliable manufacturing method. Rolling is a plastic deformation process that the metal surface is grinded and squeezed by rolling the elements, which is a cutting-free plastic processing method, so there is no chips and no change on the accuracy and tolerance of the workpiece. The surface of the workpiece is smooth as a mirror and has excellent sliding, sealing and combination by rolling.
Rolling angle: left and right 90 degrees, adjustable
Holder shank: 16、20、25、32
Workpiece roughness: Ra is less than 0.13
Vc: 50-150m/min
Fr: 0.05-0.2mm/r
Press-in-margin: 0.01-0.5mm
Machining margin: 0.02mm
Applied industry
Materials: all plastic deformed metals can be processed by rolling such as steel, cast iron, brass. The common steel roller burnishing tools can process the materials less than HRC45, diamond roller burnishing tools is able to process the hardness above HRC60.
Processing parts:
outer circle, end face, inner hole, taper, arc, etc.
|
|
|
|
Mode:CBN tools Type:cylinder liner Application:auto parts
Mode:Solid CBN Insert Type:BN-K1,BN-S20 Application:Wear Parts
Mode:CBN tools Type:Solid CBN Insert,PCBN Insert Application:hardened steel
Mode:RNMN RCMX-V RCMX-Y PCD Type:BN-K1,BN-S20,CDW010 Application:Rollers
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.
