Introduction: Although graphite is a free-cutting material, it is easy to break due to its brittleness, edge chipping, and tool wear during processing, which affects the surface quality of the product. For graphite turning, it is recommended to use Valin superhard PCD tools, such as CDW010 and CDW025. >>
earings, as one of the most important components, are widely used various industries. With the rasing needs, it required higher and higher on the bearing performance. Especially for the bearings after heat treatment, the hardness will be mu... >>
How to ensure the parallelism of the upper and lower end when processing the brake discs? A: As we all know, it required the parallelism of the upper and lower face when machining the brake disc. Many manufacturers will process one side f... >>
Complete Solution for Gear Machining After Heat treatment >>
2019-12-13
After many times tested and long time research, we found that PCD insert is the best choice of machining tungsten carbide rings. >>
Halnn first proposed cbn inserts for machining high alloy cast iron, white iron, grey iron,and has researched cbn grade BN-S300, BN-K20 and BNK30 for gray cast iron and cbn grade BN-K1, BN-H10 and BN-K10. >>
PCBN Insert is the most suitable cutting tools for turning bearing instead of grinding, especially BN-S20,BN-S200,BN-H11 PCBN Grade are widely used. For different machining condition >>
Graphite Material are difficult to machine, Halnn Tools can offer CVD Coating Tools and PCD End Mills to help satisfy the customers, and can be used for high speed machining Graphite electrode and Mold. >>
Halnn super hard,the development of high-speed cutting gray cast iron boron nitride tool BN-S300 grade and BN-K20 grade. >>
As a leading brand of professional hard material processing Tools, Halnn Tools provides a variety of green and efficient cutting and grinding Tools and solutions. >>
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.
